How to Measure

To build your own flat packs, you will need to measure the space you have available.

This is a simple but important requirement that will save you a lot of heartache and money in the long run.

Measuring your space is not difficult, however it’s crucial that you get it right as your measurements will provide the foundation for all of your planning and design.

If you get stuck you can contact your allocated goFlatpacks manufacturer who can measure your space and suggest the best layout for your needs.

Key cabinet measurements to know

  • Depth is the carcase only. It doesn’t include the door. Under a 600mm benchtop with a 20mm overhang, a 16.5mm door and a 2mm buffer, order a 561.5mm deep cabinet.
  • Height is the carcase only. Legs and kickers are extra; our adjustable legs add 90mm to 170mm.
  • Allow for gaps. A 2mm gap on each side of every door and drawer adds up to 4mm between neighbouring cabinets.
  • Allow for benchtops and cornices. A 2mm top margin keeps doors clear of a benchtop or cornice that sits flush with the cabinet.


See every measurement explained

Helpful measuring tips

Measuring do’s

Measure to the outside of architraves for all windows and doors
Measure height of the room from the floor to the ceiling
Note overhead bulkheads that may limit standard installation
The height from the floor to any windows to ensure that cabinets and benchtops fit
Note the location of any new or existing light switches and power outlets
Note the location of existing plumbing and electricity outlets
Make sure the location of the sink bowl is centered over a suitable size cabinet
Check manufacturers’ specifications for appliances prior to ordering your kitchen

Measuring do not’s

Put your fridge and cooking appliances next to each other
Undertake any gas, electrical or plumbing work yourself unless qualified
Place cooking appliances under windows or near inward opening doors
Position your rangehood any closer than 600mm from the top of your cooktop
Forget your end panels on either side of appliance cabinets and to cover the exposed side of cabinet runs
Forget to leave a minimum of 300mm clearance on either side of your cooktop to any pantries or panels